ntserv-Out Password = "ascend", User-Service = Dialout-Framed-User
Ascend-Send-Auth = Send-Auth-MS-CHAP,
Ascend-Authen-Alias = Domain\User,
Ascend-Send-Passwd = PWD,
Ascend-Send-Secret = PWD,
Ascend-Dial-Number = "1234",
Ascend-Data-Svc = Switched-64K,
Ascend-Billing-Number = "1234",
Framed-Protocol = PPP,
Ascend-Metric = 2,
Framed-Routing = None,
Ascend-Idle-Limit = 30,
Ascend-IF-Netmask = 255.255.255.0,
Framed-Compression = 1,
Ascend-Link-Compression = 1
route-2 Password = "ascend", User-Service = Dialout-Framed-User
Framed-Route = "1.2.3.4/24 1.2.3.4 1 n ntserv-Out"
After Configure-Ack of MRU-Size and Authentication-Protocol (Chap 80)
there are only some Chap-Challenge <-> Chap Response packets.
Finally the NT-Server sends a 'Terminate-Request' packet and hangs up.
A PC with User=Doamin\User AND Password=PWD (FTP TCP/IP Stack Onnet
Version 2.0) works !
Any Hints ??
Ralf
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <<A HREF="http://www.nealis.net/ascend/faq">http://www.nealis.net/ascend/faq</A>>
</PRE>
<!--X-MsgBody-End-->
<!--X-Follow-Ups-->
<HR>
<STRONG>Follow-Ups</STRONG>:
<UL>
<LI><STRONG><A HREF="msg11432.html">(ASCEND) 5.0ap36 comments</A></STRONG></LI>
<UL>
<LI><EM>From</EM>: nolan@cp-tel.net (Nolan W. Bailey, Jr.)</LI>
</UL>
</UL>
<!--X-Follow-Ups-End-->
<!--X-References-->
<!--X-References-End-->
<!--X-BotPNI-->
<HR>
<UL>
<LI>Prev by Date:
<STRONG><A HREF="msg11308.html">Re: (ASCEND) filters</A></STRONG>
</LI>
<LI>Next by Date:
<STRONG><A HREF="msg11306.html">Re: (ASCEND) Upgraded Max4000 with 96HDLC</A></STRONG>
</LI>
<LI>Prev by thread:
<STRONG><A HREF="msg11461.html">Re: (ASCEND) filters</A></STRONG>
</LI>
<LI>Next by thread:
<STRONG><A HREF="msg11432.html">(ASCEND) 5.0ap36 comments</A></STRONG>
</LI>
<LI>Index(es):
<UL>
<LI><A HREF="mail7.html#11314"><STRONG>Main</STRONG></A></LI>
<LI><A HREF="thrd265.html#11314"><STRONG>Thread</STRONG></A></LI>
</UL>
</LI>
</UL>
<!--X-BotPNI-End-->
<!--X-User-Footer-->
<!--X-User-Footer-End-->
</BODY>
</HTML>