Below is what I'm talking about this only lives in Incremental's and
engineering releases right now. So To fully take advantage of
upgrading/downgrading OS releases via SNMP you must be running an
incremental.
The reboot is:
sysReset OBJECT-TYPE
SYNTAX INTEGER {
no-op( 1 ),
reset( 2 )
}
ACCESS read-write
STATUS mandatory
DESCRIPTION "The reset takes effect after 1 minute."
::= { systemStatusGroup 8 }
Jason Nealis
Director Internet Operations
Network Access
Erols Internet
On Tue, 2 Dec 1997, Matt Holdrege wrote:
> At 09:38 AM 12/2/97 -0500, Jason Nealis wrote:
> >
> > Actually right now what I do it via SNMP, But I still have to telnet
> >to each box and do the nvram, Cause the SysReset variable is only
> >in the I branch (UGH COUGH COUGH DAMMIT), But once 6.0 comes up
> >you can use this upgrade as many boxes as needed but you need CMU's
> >SNMP installed to do it.
>
> Cough, Cough. CMU??? I'm pretty sure I tested this with Openview a while
> back. It should also work fine with Navis Access. Unless I'm missing
> something?
>
> Matt Holdrege <A HREF="http://www.ascend.com">http://www.ascend.com</A> matt@ascend.com
>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <<A HREF="http://www.nealis.net/ascend/faq">http://www.nealis.net/ascend/faq</A>>
</PRE>
<!--X-MsgBody-End-->
<!--X-Follow-Ups-->
<!--X-Follow-Ups-End-->
<!--X-References-->
<HR>
<STRONG>References</STRONG>:
<UL>
<LI><STRONG><A HREF="msg11324.html">Re: (ASCEND) Max 5.0Ap36</A></STRONG></LI>
<UL>
<LI><EM>From</EM>: Matt Holdrege <matt@ascend.com></LI>
</UL>
</UL>
<!--X-References-End-->
<!--X-BotPNI-->
<HR>
<UL>
<LI>Prev by Date:
<STRONG><A HREF="msg11327.html">Re: (ASCEND) Max 5.0Ap36</A></STRONG>
</LI>
<LI>Next by Date:
<STRONG><A HREF="msg11329.html">Re: (ASCEND) Max 5.0Ap36</A></STRONG>
</LI>
<LI>Prev by thread:
<STRONG><A HREF="msg11337.html">Re: (ASCEND) Max 5.0Ap36</A></STRONG>
</LI>
<LI>Next by thread:
<STRONG><A HREF="msg11276.html">Re: (ASCEND) Max 5.0Ap36</A></STRONG>
</LI>
<LI>Index(es):
<UL>
<LI><A HREF="maillist.html#11328"><STRONG>Main</STRONG></A></LI>
<LI><A HREF="thrd256.html#11328"><STRONG>Thread</STRONG></A></LI>
</UL>
</LI>
</UL>
<!--X-BotPNI-End-->
<!--X-User-Footer-->
<!--X-User-Footer-End-->
</BODY>
</HTML>