Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) wddi Debug Data Format
It's just a ethernet standard packet.
The first 12 bytes are the dest and src ethernet addresses.
Then 2 bytes of ethernet type
Then the IP packet starts with the 45 byte (IP version 4; length 5*4 bytes)
etc.
This particular packet is an echo request (ping) from 192.168.100.102 to
165.227.2.10.
At 09:34 AM 11/7/97 +0000, Rylan Luke wrote:
>I am attempting to find a logon burp under NT 4 which causes my
>Pipeline 75 to dial out.
>
>Using wddi from Diagnostics, I get a hex dump of the packet which
>causes the dialout.
>
>I was promised a faxed document from Ascend Tech support which
>explains what kind of data I am looking at... it never arrived.
>
>Here is the data from wddi; is this an IP packet?
>
> [0000]: 00 C0 7B 63 B1 1E 00 80 C8 86 26 F6 08 00 45 00
> [0010]: 00 3C E9 05 00 00 1F 01 E5 BF C0 A8 64 66 A5 E3
> [0020]: 02 0A 08 00 25 5C 01 00 27 00 61 62 63 64 65 66
> [0030]: 67 68 69 6A 6B 6C 6D 6E 6F 70 71 72
>
>I also looked on Ascend's web site, and couldn't find any documents
>explaining this command, or the data format.
>
>Is there such a document; is this just a standard packet that I can
>use an RFC to decode?
>
>Come on, Ascend. I can do the homework if you'll just give me a
>little information!
>_______________________________
> Rylan Luke (rylan@rymar.com)
> Rymar Engineering
>++ Ascend Users Mailing List ++
>To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
>To get FAQ'd: <http://www.nealis.net/ascend/faq>
>
>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
References: