Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ASCEND) Liv. Radius with 4048's

Yes Liv Radius does work but if you are doing any filtering then it won't.
Ascend doesn't support the Framed-Id-Filter attribute 11. They've told
they will but never give a time frame. Maybe we should put on some heat
and let them know we really need this feature.


East County Internet Services, Inc
-Jess-
CFO
System Admin

On Sat, 8 Nov 1997, Ascend List Serve wrote:

> 
> 
> Livingston radius 2.0.1 works fine with all of our products
> (pm2er/pm2er's, max 4004's, max 4000's with 56K modems and Total Control 
> Hubs) all off of 1 primary radius server and a mirror as a backup.
> 
> There was a dictionary definition that gets added with the 56K code that 
> caused radiusd 2.0 to core dump but 2.0.1 fixed the problem or you could 
> change the dictionary (I cant remember the actual definition but 500 
> rings a bell)
> 
> On Thu, 6 Nov 1997, David Routh wrote:
> 
> > Tim,
> > 
> > 
> > Yep, I tried a few other things today but, just like you write it's the
> > reboot that causes the dump.
> > 
> > 
> > On another note... Ascend uses the User-Service= and the Liv will take
> > either User-Service-Type or Service-Type.... with that it seems I'll have
> > to go to the Ascend Radius anyway...
> > 
> > 
> > David
> > 
> > 
> > At 05:35 AM 11/5/97 -0800, you wrote: 
> > 
> > >>>>
> > 
> > <excerpt>
> > 
> > <fontfamily><param>Arial</param><smaller>David
> > 
> > 
> > I can confirm that rebooting a 4048 will cause Liv v2.0 radius to core
> > 100% of the time.
> > 
> > 
> > I have send my debug file to Kevin
> > 
> > 
> > Tim Patterson
> > 
> > ----------
> > 
> > > From: David Routh
> > <<<underline><color><param>0000,0000,ffff</param>ascend@davlin.net</color></underline>>
> > 
> > > To:
> > <underline><color><param>0000,0000,ffff</param>ascend-users@bungi.com
> > 
> > </color></underline>> Subject: (ASCEND) Liv. Radius with 4048's
> > 
> > > Date: Wednesday, November 05, 1997 3:07 PM
> > 
> > > 
> > 
> > > Hello,
> > 
> > > 
> > 
> > > Is anyone using Liv. Radius v2.0 with Maxens.  We're bringing up Max
> > 4048's
> > 
> > > and they are causing core dumps on Livingston's Radius... It 
> > generally
> > 
> > > takes about 4 to 5 minutes to do this... also, it's doing this before
> > 
> > > anyone even tries to authenticate.  I realize it may be a config on my
> > end
> > 
> > > so I may need a pointer in the right direction.
> > 
> > > 
> > 
> > > Thanks in advance...
> > 
> > > 
> > 
> > > David
> > 
> > > 
> > 
> > > BTW, the Maxens are running 5.0Ap33.
> > 
> > > ++ Ascend Users Mailing List ++
> > 
> > > To unsubscribe:	send unsubscribe to
> > <underline><color><param>0000,0000,ffff</param>ascend-users-request@bungi.com
> > 
> > </color></underline>> To get
> > FAQ'd:	<<<underline><color><param>0000,0000,ffff</param>http://www.nealis.net/ascend/faq</color></underline>>
> > 
> > </smaller></fontfamily>
> > 
> > </excerpt><<<<<<<<
> > 
> > 
> > 
> > ++ Ascend Users Mailing List ++
> > To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
> > To get FAQ'd:	<http://www.nealis.net/ascend/faq>
> > 
> 
> ++ Ascend Users Mailing List ++
> To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd:	<http://www.nealis.net/ascend/faq>
> 

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>
References: