Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
(ASCEND) P75 to P75 connection with NAT on one end.
I currently have a network setup with a P75 at an Internet site,
a P75 at a remote office, and a Linux machine running IPMasquerade
to hide the remote LAN behind a single IP address. This is on
six-month-old P75's (<722xxx), so I can only do single-address NAT.
Anyhow, I made a run at setting up NAT on the remote P75 a month
ago, with software release 5.1a, but had no luck. My problem seemed
to revolve around the IP address of the remote P75. If it was set
to an address on the remote LAN, it would dial the Internet-connected
P75, which would immediately disconnect, and that's that. It could
never successfully connect.
My suspicion is that I'm missing something on the Internet-connected
P75. How (exactly) do I need to arrange the "My Addr" and "Rem
Addr" items for the Internet-connected router and the remote
single-address NAT router?
This weekend I'm going to make another run at things. Perhaps this
time I'll clear the configuration and start completely over...
Thanks,
---
scott hess <scott@doubleu.com> (606) 578-0412 http://www.doubleu.com/
<Favorite unused computer book title: The Compleat Demystified Idiots
Guide to the Zen of Dummies in a Nutshell in Seven Days, Unleashed>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>