I'm ussing 11.2(9)P and have had no problems whatsoever.... Here's a sample config for those of you trying to connect to Ascend boxes (this config also works with USR TC racks and Livingston PM3s): (Login name in this case is "gothic", with a cap-I in front to signify ISDN. This connection is a nailed-up 128k routing an entire class C to my desktop). BTW, I've never been able to get 10.x to work with ANYTHING. If I see a Cisco box with 10.x IOS on it, I immediately upgrade it. Current configuration: version 11.2 service timestamps debug uptime service password-encryption no service udp-small-servers no service tcp-small-servers hostname Igothic enable secret 5 <secret stuff> enable password 7 <password> username Igothic password 7 <password> ip name-server 207.207.0.3 ip name-server 206.127.0.3 isdn switch-type basic-ni1 interface Loopback0 no ip address interface Ethernet0 ip address 207.207.49.1 255.255.255.0 interface BRI0 description texas.net ip unnumbered Ethernet0 no ip mroute-cache encapsulation ppp dialer idle-timeout 604800 dialer string 4850143 dialer load-threshold 1 either (for 64k, make the 1 a 255) dialer-group 1 isdn spid1 512302341701 3023417 isdn spid2 512302329801 3023298 no fair-queue compress stac ppp authentication pap callin (if you dont have this line, shit will break) ppp pap sent-username Igothic password 7 <password> ppp multilink ip classless ip route 0.0.0.0 0.0.0.0 BRI0 ip http server (for cisco's nifty web-server-stats) dialer-list 1 protocol ip permit line con 0 line vty 0 4 password 7 <password> login end -- Bill Bradford Sr. Systems Engineer mrbill@texas.net Texas Networking, Inc. <A HREF="http://www.texas.net">http://www.texas.net</A> ------------------------------------------------------------------ "USENET is not a right." "USENET is a right, a left, a jab, and a sharp uppercut to the jaw. The postman hits! You have new mail." -- Ed Vielmetti & Chip Salzenberg ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: <<A HREF="http://www.nealis.net/ascend/faq">http://www.nealis.net/ascend/faq</A>> </PRE> <!--X-MsgBody-End--> <!--X-Follow-Ups--> <!--X-Follow-Ups-End--> <!--X-References--> <HR> <STRONG>References</STRONG>: <UL> <LI><STRONG><A HREF="msg10469.html">(ASCEND) cisco <> ascend</A></STRONG></LI> <UL> <LI><EM>From</EM>: Michiel Boland <boland@diva.nl></LI> </UL> <LI><STRONG><A HREF="msg10472.html">Re: (ASCEND) cisco <> ascend</A></STRONG></LI> <UL> <LI><EM>From</EM>: Phillip Vandry <vandry@Mlink.NET></LI> </UL> </UL> <!--X-References-End--> <!--X-BotPNI--> <HR> <UL> <LI>Prev by Date: <STRONG><A HREF="msg10476.html">(ASCEND) Framed-Filter-Id on the MAX</A></STRONG> </LI> <LI>Next by Date: <STRONG><A HREF="msg10478.html">(ASCEND) Bad press from the NANOG list</A></STRONG> </LI> <LI>Prev by thread: <STRONG><A HREF="msg10472.html">Re: (ASCEND) cisco <> ascend</A></STRONG> </LI> <LI>Next by thread: <STRONG><A HREF="msg10496.html">Re: (ASCEND) Change in defaults when upgrading from 4.x to 5.0Ap13?</A></STRONG> </LI> <LI>Index(es): <UL> <LI><A HREF="mail2.html#10477"><STRONG>Main</STRONG></A></LI> <LI><A HREF="thrd232.html#10477"><STRONG>Thread</STRONG></A></LI> </UL> </LI> </UL> <!--X-BotPNI-End--> <!--X-User-Footer--> <!--X-User-Footer-End--> </BODY> </HTML>