> > > > >Andy, I had the same problem with the Channelized T1s with both > >AMI/SF and B8ZS/ESF. The Telco is using Northern Telecom DMS100 > >switches. The only way I could get anything at all higher than > >33.6 was to replace the T1s with PRI circuits. I now get as > >good as 48000 and have tried several K56Flex modems. > > I would be interested to know if anyone is getting higher connect speeds > than 42000 with channelized T1's. The phone company above just probably > didn't have their T1's set up properly. There are 4 different phone companies involved here. Ameritech, GTE, Sprint, Us. We had to add a 4db pad trunk to > trunk on our Nortel DMS-10 before we could get any 56flex connection. This > is not standard for a telephone company. Usually padding is added line to > trunk on EAS and Toll trunks. Wow, I'm not a telco guy, we do have a DMS 10 though. I know some of the other cities that we provide access have them as well through GTE mostly. Can you explain this a bit to me please as I would like to be able to go to the telco guys and explain what to check for. If it is a phone company that is > inexperienced with ISP's(Like we were when we started) they may not know how > to set up the correct padding on the trunks. This is very much a possibilty for us. I know they don't run that many high caps and just recently got BRI support for the switch..etc.. > Now we get 42000 maximum. I'm > going to make an assumption here and someone please tell me if they see > anything different. A channel in a T1 circuit is 64kb but 8 kb of this is I would be really interested in knowing if this math is accurate. > that others are talking about. Unfortunately, I cannot do PRI with my > DMS-10 yet so much of this is derived from what I've heard others say about Neither can we, but Ameritech can. Its just prohibitively expensive and they ran out of room on their switch for them for another couple of months. This might be the key I (and from the replies I have gotten, *alot*, of other people) am looking for. Sincerely, Andy Walden System Administrator MTCO Communications 1-800-859-6826 ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: <<A HREF="http://www.nealis.net/ascend/faq">http://www.nealis.net/ascend/faq</A>> </PRE> <!--X-MsgBody-End--> <!--X-Follow-Ups--> <!--X-Follow-Ups-End--> <!--X-References--> <HR> <STRONG>References</STRONG>: <UL> <LI><STRONG><A HREF="msg11148.html">Re: (ASCEND) K56..</A></STRONG></LI> <UL> <LI><EM>From</EM>: "Greg Hale" <greghale@logantele.com></LI> </UL> </UL> <!--X-References-End--> <!--X-BotPNI--> <HR> <UL> <LI>Prev by Date: <STRONG><A HREF="msg11154.html">re: (ASCEND)56K</A></STRONG> </LI> <LI>Next by Date: <STRONG><A HREF="msg11136.html">Re: (ASCEND) Random reboots of a Max2000</A></STRONG> </LI> <LI>Prev by thread: <STRONG><A HREF="msg11148.html">Re: (ASCEND) K56..</A></STRONG> </LI> <LI>Next by thread: <STRONG><A HREF="msg11163.html">Re: (ASCEND) K56..</A></STRONG> </LI> <LI>Index(es): <UL> <LI><A HREF="maillist.html#11153"><STRONG>Main</STRONG></A></LI> <LI><A HREF="thrd253.html#11153"><STRONG>Thread</STRONG></A></LI> </UL> </LI> </UL> <!--X-BotPNI-End--> <!--X-User-Footer--> <!--X-User-Footer-End--> </BODY> </HTML>