Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) UPdate on NAT (WAS Pipeline 85)
I still don't understand why you didn't see a route in the table before
doing this....maybe there was something else I missed. In my setup, I have
the Lan Address set to one of the possible IP addresses of the MAXen I can
dial into - it doesn't matter which one I actually hit, they are on the
same (sub)net. I get the following in my route table:
ascend% sh ip ro
Destination Gateway IF Flg Pref Met Use Age
0.0.0.0/0 192.207.23.93 wan13 Sn 100 1 59 266
10.20.0.0/16 - ie0 C 0 0 42453 321861
10.20.1.1/32 - local CP 0 0 4691 321861
127.0.0.0/8 - bh0 CP 0 0 0 321861
127.0.0.1/32 - local CP 0 0 0 321861
127.0.0.2/32 - rj0 CP 0 0 0 321861
192.168.169.11/32 - local rPTn 100 0 77 266
192.207.23.93/32 192.207.23.93 wan13 rTn 60 1 0 266
192.207.23.93/32 192.207.23.93 wan13 *S 120 7 1 321861
224.0.0.0/4 - mcast CP 0 0 0 321861
224.0.0.5/32 - bh0 CP 0 0 0 321861
224.0.0.6/32 - bh0 CP 0 0 0 321861
224.0.0.9/32 - local CP 0 0 0 321861
255.255.255.255/32 - ie0 CP 0 0 10380 321862
At 07:33 AM 7/8/98 -0700, Bennie Warren wrote:
>After seeing this message I changed the info in my Pipeline and now the
>addresses are the way they should be. the top show ip route is the old
>before change and the bottom show ip route is with Jason Nealis's
>recommendation. As you can see 209.78.78.41/32 this is the address
>assigned to the Pipeline by the Max. Thanks to everyone on this one.
>
>Bennie
>
Kevin Smith Ascend Communications...
Customer Satisfaction ...where Network Solutions never end.
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
References: