Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) I need some help.
At 20:04 1998/07/09 -0400, TJ Schuler wrote:
>The remote site has around 10 computers connected to a hub along with
>the 50. The local site has another 50 connected to one of our switches.
I've never tried bridging off of a switched port, but this might
be the source of some of your problems.
>I have routing turned off and bridging turned on right now - I can ping
>from one pipeline to the other but that is basically it. Basically
>should I use routing or bridging and how do I set these things up so the
>packets are going through?
one item to check is that if you want to bridge IP,
you must have route-IP turned off, otherwise the Pipeline
will try to route the IP packets and bridge everything else.
If you don't have a specific need to bridge (ex: NetBEUI)
it may be better to route, helps to keep the line usage down,
among other things.
-Jim H
----
Jim Howard Sr Network Engineer Lyceum Internet
jhoward@lyceum.com http://www.lyceum.com/ 404.248.1733
My PGP Public Key: http://www.lyceum.com/~jhoward/pgp-key.txt
Fingerprint: 7E8B E2BA 1314 2535 CB08 CFF9 119B 7CD3 2488 954D
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
Follow-Ups: