Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: (ASCEND) TNT: Cause code 185

As you can see from the post below, I have not tried with the DRAM card
yet - does it solve the problems?

Todd A. Blank
Columbus NAP, Inc./eNET, Inc.
614.221.7830 x1
614.221.5422 Fax
614.207.5853 Pager/Cellular

		-----Original Message-----
		From:	Jason Nealis [mailto:nealis@babylon.erols.com]
		Sent:	Saturday, July 18, 1998 9:47 AM
		To:	Todd A. Blank
		Cc:	'WCN Customer Service'; ascend-users@bungi.com
		Subject:	RE: (ASCEND) TNT: Cause code 185


		 Agreed, I couldn't even run 2.1 without a DRAM card,
the boxes 
		would reset every 20 minutes w/ Fatal Error's.

		Jason Nealis
		Director Internet Operations / Network Access
		Erols Internet (An RCN Company)


		On Fri, 17 Jul 1998, Todd A. Blank wrote:

		> How much RAM do you have in your TNT?  Is this a
recent upgrade from
		> 1.x?  Do you have the 32MB DRAM card?
		> 
		> I experienced the same symptoms with my TNT, so I had
to bail back to
		> 1.3Ap28 - it is the last stable TNT release I
remember.  If you need it,
		> I can send it to you, because it is not on Ascend's
FTP site.
		> 
		> When I had these problems, Ascend TAC said it was due
to the fact that
		> 2.1.x requires more DRAM.  I now have the DRAM card,
but have not had a
		> chance to migrate back to 2.1.x.  I'll be trying it
next week.
		> 
		> Todd A. Blank
		> Columbus NAP, Inc./eNET, Inc.
		> 614.221.7830 x1
		> 614.221.5422 Fax
		> 614.207.5853 Pager/Cellular
		> 
		> 		-----Original Message-----
		> 		From:	WCN Customer Service
		> [mailto:cust.service@wcc.net]
		> 		Sent:	Friday, July 17, 1998 1:55 PM
		> 		To:	ascend-users@bungi.com
		> 		Subject:	(ASCEND) TNT: Cause code
185
		> 
		> 		Hello,
		> 
		> 		I have a problem that I hope someone can
point me in
		> some direction of
		> 		fixing.  
		> 
		> 		Our TNT has version 2.1.0 and it gets a
LOT of cause
		> code 185's
		> 		We have ISDN and k56 modems
		> 
		> 		In the FAQ about cause code 185 at:
		> http://www.ascend.com/faqs/2/1099.html
		> 		it states it could be caused by 
		> 
		> 		 5. T1 or PRI line bounces.
		> 
		> 		What are these and where are they
caused?
		> 		We are getting them on both ISDN and
analog disconnects.
		> 
		> 		Also, are the number of these code 185's
reduced in
		> 2.1.3 ?
		> 
		> 
		> 		Thanks,
		> 		Karen Cutrer,
		> 		West Central Net
		> 
		> 		++ Ascend Users Mailing List ++
		> 		To unsubscribe:	send unsubscribe to
		> ascend-users-request@bungi.com
		> 		To get FAQ'd:
<http://www.nealis.net/ascend/faq>
		> ++ Ascend Users Mailing List ++
		> To unsubscribe:	send unsubscribe to
ascend-users-request@bungi.com
		> To get FAQ'd:	<http://www.nealis.net/ascend/faq>
		> 
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>