Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
(ASCEND) Pipeline 50 bridging problem on an NT network
Has anyone any experience bridging an NT network with 2 pipeline 50s?
I have no experience with this, and here's my problem:
I'm running a class C network with NT server running tcp/ip.
I have 2 pipeline 50s which i plan to use to bridge two locations over
ISDN, both locations will run an NT network with one PDC and one BDC on
the other side.
I also use another (3rd) pipeline for an internet connection.
Here's what i got so far:
i have an established connection between the two locations using the
pipeline bridge.
I can ping anything from one location to the other over the bridge.
I can telnet into the main file server from the second location.
Here's what i can't do:
I can't logon to the server from the remote location.
I can ping it, can telnet in, can't logon.
I can't browse the remote network either.
Obviously I'm missing something, I've spent the last few hours searching
pipeline faq, books, NT books and I can't find anything. My guess is
the NT authorization process needs something more then tcp/ip or perhaps
one of my pipeline settings is incorrect.
The internet works through the bridge as well.
Any help or suggestions are greatly appreciated.
Kasia Trapszo
System Administrator (obviously not highly competent) Macristy
Industries
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>