Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: (ASCEND) Pipeline 220 - Very slow

No firewall installed.  We are running bare bones with just one Ethernet
port active (for testing).  I have eliminated any extra devices that I
thought might effect traffic and conflicts.  It is setup exactly as our
PL130.


Scott Page
Network Operations
UltimateCom, LLC.
4643 S. Ulster St.  Suite 1450
V303.713.1975
F303.713.9294
e-mail scott@ultimateis.com <scott@ultimateis.com> 
Web www.ultimateis.com <www.ultimateis.com> 

		-----Original Message-----
		From:	Peter Lalor [mailto:plalor@infoasis.com]
		Sent:	Tuesday, September 08, 1998 4:12 PM
		To:	Scott Page
		Cc:	ascend-users@max.bungi.com
		Subject:	Re: (ASCEND) Pipeline 220 - Very slow

		>From: Scott Page <scott@ultimateis.com>
		>>>My company has been happily using a Pipeline 130 for
about 8 months.  It is
		>>>connected to a fractional 512k T1 Frame Relay line.  We
recently purchased a
		>>>Pipeline 220 about 2 weeks ago (we are splitting our
network for web servers
		>>>and secure internal network.  Everything on the 220 runs
great for about
		>>>15min, then only pings and e-mail go through.  HTTP, FTP
and other protocols
		>>>are very slow.  SMTP mail is still as fast as it has
been.  I have tried
		>>>about every version of firmware.  Even if I only use one
of the Ethernet
		>>>ports, the 220 slows to almost a stop.  Ascend nor my ISP
have figured this
		>>>out yet.  I have sent a trace to Ascend support using the
wann 64 and wano
		>>>64 commands in diag.  If anyone has any suggestions I
would appreciate it
		>>>immensely.  I have a deadline to get this box working by
Sept. 15th 1998.
		>
		>>Make sure you aren't filtering ARP on the Ethernet. Just
an idea.
		>>
		>>http://www.ascend.com/696.html covers it.
		>
		>I have no filters set

		Sounds like an ARP problem to me, due to the dying-off after
some time. Are
		you running proxy ARP on more than one device? You say you
have a "secure
		internal network". What's securing it? Perhaps a firewall is
interfering?
		Have you looked at traceroute?

		Etc., etc.

		Peter Lalor           Infoasis
		plalor@infoasis.com   http://www.infoasis.com/
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>