Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
(ASCEND) [Q] OSPF Error...
Hello all,
What does this mean? OSPF: Auth type != area type
netroplex%show ospf errors
ERRORS from: boot
0: IP: Bad OSPF pkt type 0: IP: Bad IP Dest
0: IP: Bad IP proto id 0: IP: Pkt src = my IP addr
0: OSPF: Bad OSPF version 0: OSPF: Bad OSPF checksum
0: OSPF: Bad intf area id 0: OSPF: Area mismatch
0: OSPF: Bad virt link info 304: OSPF: Auth type != area type
0: OSPF: Auth key != area key 0: OSPF: Packet is too small
0: OSPF: Packet size > IP length 0: OSPF: Transmit bad
0: OSPF: Received on down IF 0: Hello: IF mask mismatch
0: Hello: IF hello timer mismatch 0: Hello: IF dead timer mismatch
0: Hello: Extern option mismatch 0: Hello: Nbr Id/IP addr confusion
0: Hello: Unknown Virt nbr 0: Hello: Unknown NBMA nbr
0: DD: Unknown nbr 0: DD: Nbr state low
0: DD: Nbr's rtr = my rtrid 0: DD: Extern option mismatch
0: Ack: Unknown nbr 0: Ack: Nbr state low
0: Ls Req: Nbr state low 0: Ls Req: Unknown nbr
0: Ls Req: Empty request 0: LS Req: Bad pkt
0: LS Update: Nbr state low 0: Ls Update: Unknown nbr
0: Ls Update: Newer self-gen LSA 0: Ls Update: Bad LS chksum
0: Ls Update: less recent rx 0: Bad LSA type
0: DD: Bad N and E bit combination 0: DD: Bad N bit
0: Hello: Bad N bit 0: Hello: Bad E and N bit combination
Thanks,
Laurent
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>