(ASCEND) cisco 4000 PPP CHAP IP call to max 6000 question?

["Alexander C. Pitzner" <pitzner@DPW.COM>]

>Hello,

I'm trying to make an IP call from a Cisco 4000 (via a Bri port) to a max
6000.  I've accomplished this before, but I'm having difficulty duplicating
it.  
>
>On the Cisco side  (OS level 11.1.(14)
>
>hostname [cisco 4000]

>username [ascend] password xxxxx
>
>Bri 0
>	ip address x.x.x.x 255.255.255.0
>	dialer map ip x.x.x.x name [ascend] broadcast [phone #]
>	PPP auth CHAP callin
>
>On the Ascend side  (OS level 6.1.0)
>
>Ethernet
> Answer
>  PPP options
>	Receive auth=either
>
> Connection profile 
>
>	Station=[cisco 4000]
>			
>  Encaps
>	Send Auth=CHAP
>	send pw=xxxxx		(these are the cisco's chap password)
>	recieve pw=xxxxx
>	
>  Ip options		(using numbered interfaces)
>	LAN addr=[cisco bri0 ip address]/32
>	WAN addr=
>	IF  addr=[ascend link specific ip address]/32
>
>  Telco
>	Ansorig=Ans only
>
>Here's what we get form cisco debug
>
>%LINK-3-UPDOWN: Interface BRI0: B-Channel 1, changed state to up
>PPP BRI0: B-Channel 1: treating connection as a callout
>PPP BRI0: B-Channel 1: No remote authentication for call-out
>ppp: sending CONFREQ, type = 5 (CI_MAGICNUMBER), value = 0x780210
>ppp: sending CONFREQ, type = 5 (CI_MAGICNUMBER), value = 0x780210
>ppp: sending CONFREQ, type = 5 (CI_MAGICNUMBER), value = 0x780210
>%ISDN-6-CONNECT: Interface BRI0: B-Channel 1 is now connected to
0012122079360
>ppp: sending CONFREQ, type = 5 (CI_MAGICNUMBER), value = 0x780210
>ppp: sending CONFREQ, type = 5 (CI_MAGICNUMBER), value = 0x780210
>ppp: sending CONFREQ, type = 5 (CI_MAGICNUMBER), value = 0x780210
>ppp: sending CONFREQ, type = 5 (CI_MAGICNUMBER), value = 0x780210
>ppp: sending CONFREQ, type = 5 (CI_MAGICNUMBER), value = 0x780210
>ppp: sending CONFREQ, type = 5 (CI_MAGICNUMBER), value = 0x780210
>ppp: sending CONFREQ, type = 5 (CI_MAGICNUMBER), value = 0x780210
>ppp: sending CONFREQ, type = 5 (CI_MAGICNUMBER), value = 0x780210
>%ISDN-6-DISCONNECT: Interface BRI0: B-Channel 1  disconnected from
>0012122079360
> , call lasted 23 seconds
>%LINK-3-UPDOWN: Interface BRI0: B-Channel 1, changed state to down
>
>What am I missing?	
>
>Thanks in advance!
>
>	
Alex Pitzner
Davis Polk & Wardwell
Technical Support
(212) 450-5777
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>