Real Time Ascend Maling List Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: (ASCEND) 7.2.3 for the Max

	We've been running 6.1.24 for 90+ days without a problem.

Regards,

J. Tyler Kinchen
@:tyler_kinchen@ml.com



		-----Original Message-----
		From:	Jim Williams [mailto:jaw12@ntrnet.net]
		Sent:	Thursday, September 23, 1999 2:09 PM
		To:	'Matt Holdrege'; ascend-users@bungi.com
		Subject:	RE: (ASCEND) 7.2.3 for the Max

		What is currently the most stable release of code that
everyone is running
		for the Max 4004 series boxes?

		Jim Williams
		President
		Ntrnet Systems, Inc.
		jaw12@ntrnet.net
		919.484.0504 x122
		fax: 919.484.0782




		-----Original Message-----
		From: owner-ascend-users@max.bungi.com
		[mailto:owner-ascend-users@max.bungi.com]On Behalf Of Matt
Holdrege
		Sent: Wednesday, September 22, 1999 1:50 AM
		To: ascend-users@bungi.com
		Subject: (ASCEND) 7.2.3 for the Max


		TAOS 7.2.3 software for the MAX family has been given to
Customer Support.
		This release contains the following:

		Corrections
		TR 2879: In Terminal Server menu mode, unavailable
selections could be
		chosen.
		TR 2987: MAX 4000 was running without V.110 card, but it
answered a V.110
		call.
		TR 3828: You could not disable modems via SNMP if the MAX
was answering too
		many incoming calls.
		TR 4210: ATMP RIP was sent by home agent, even though ATMP
RIP was set to
		Off.
		TR 4251: Routing problems occurred because dynamic routes
were not updated
		to the Max that had the outgoing profile.
		TR 4323: PIAF could not communicate with CLID auth using
RADIUS.
		TR 4615: Max 4004 reset occasionally with FE1. This occurred
with ISDN
		calls, 4 PRI lines and using IP protocol.
		TR 4679: MAX reset occasionally with FE8 when PPTP was used
from PIAFS
		terminal.
		TR 4868: MAX supporting OSPF, generated warnings 175, 200,
and 201.
		TR 4879: Protection violation errors related to IPX were
occurring.
		TR 4888: Max units with L2TP configurations would have some
configuration
		corruption when upgrading to 7.0+ software.
		TR 4922: EchoSuppressToneDisable parameter disabled tone for
all calls.
		TR 4967: Variables were missing for L2TP/ATMP/PPTP bits in
sysSPROM option
		in Ascend MIB.
		TR 4996: LNS could not do CLID/DNIS authentication.
		TR 5181: Radius Accounting was not working when Auth-Type
was set to
		RADIUS/LOGOUT.
		TR 5305: The response to the ID packet was being rejected
due to an older
		code version.
		TR 5314: Low ISDN login rate in stacking environment.
		TR 5325: The IP Global profile was not available during
system
		initialization.
		TR 250283: Using different trunk numbers for each BRI
channel did not work.
		TR 258640: The MAX 4000 was not setting the M-BIT during
data transfer
		between the modem client and the X25 Host.
		TR 258646: L2TP and AAC authentication failed when a single
RADIUS server
		was used.
		TR 258648: Overlap receiving ISDN mode option was missing in
the febk.m40
		software load.
		TR 258738: MAX did not differentiate between user-defined
and telco-defined
		CLID numbers.
		TR 258756: FTP failed when using Firewall and NAT on the
same Dialout
		profile.
		TR 258787: The Filter ID attribute was not working.
		TR 258813: Occasionally, the MAX showed available modems as
busy with the
		avm diagnostic command.
		TR 258821: Ghost ATMP tunnels were created and were not
removed on the Home
		Agent.
		TR 258831: LNS could not do CLID/DNIS authentication.
		TR 258836: The Max units reset with a FE29 after having
received multiple
		Warning 104 messages.
		TR 258851: The MAX unit reported incorrect baud rates for
L2TP and PPTP
		sessions.
		TR 258864: SNMP trap was not being sent when E1/PRI went
from DF status to
		TE status.
		TR 1000145: MAX 6000 reboot with FE17 and warning 179. This
occurred under
		heavy data over ISDN, R2 outdial load.
		TR 1000195: FE 29 occurred during MP outdial.
		TR 1000214: MAX path MTU discovery was broken for ATMP GRE.
MTU was zero
		and force fragmentation was off.
		TR 1000221: After reboot, the MAX 6000 would not accept or
send calls.
		TR 1000223: Incorrect information element was being sent in
the call
		proceeding the PRI call.

		Conexant (formerly Rockwell) firmware versions
		Digital modem module Conexant versions
		K56-8, -12, and -16 2.098
		V.34 Modem-12 1.610G24
		V.34 Modem-8 1.610G19

		Notice of discontinuance:
		Software support for v.34 slot cards.


		++ Ascend Users Mailing List ++
		To unsubscribe:	send unsubscribe to
ascend-users-request@bungi.com
		To get FAQ'd:	<http://www.nealis.net/ascend/faq>

		++ Ascend Users Mailing List ++
		To unsubscribe:	send unsubscribe to
ascend-users-request@bungi.com
		To get FAQ'd:	<http://www.nealis.net/ascend/faq>
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>