Real Time Ascend Maling List Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: (ASCEND) Max 1800 to WinNT routing
Thanks. I got a similar suggestion yesterday and luckily our static IPs
are on one /24 and pools are on another /24 so hopefully we can get this
to work.
--On Thu, 27 Apr 2000 22:59:51 -0400, Troy Settle said...
>
> Earl,
>
> With most routers (cisco, ascend, 3com, etc..) and OSes (BSD, redhat,
> debian, solaris, etc...), you can use the Radius profile you're familiar
> with.
>
> Unfortunately, with NT as a router, you have to take special steps to get
> things to work. NT can not route between 2 interfaces that are on the same
> subnet (or the same class-c). Here's a profile that will work with NT:
>
> ntbox Password="Isuck"
> Service-Type = Framed-User,
> Framed-Protocol = PPP,
> Framed-Routing = None,
> Framed-Address = 192.168.10.1,
> Framed-Route = "192.168.20.1/24 192.168.10.1 1",
> Ascend-Maximum-Channels = 2,
> etc....
>
> This sucks in general, but sucks most specifically for those young ISPs with
> only a single /24 to play with. They end up having to use private addresses
> for the Framed-Address.
>
>
> G'luck,
>
> -Troy
>
> PS: This might be a given, but I think it's worth mentioning that the NT
> box really should have RRAS installed (as opposed to normal RAS).
>
>
>
> ** -----Original Message-----
> ** From: owner-ascend-users@max.bungi.com
> ** [mailto:owner-ascend-users@max.bungi.com]On Behalf Of Earl Smith
> ** Sent: Thursday, April 27, 2000 7:09 AM
> ** To: jcdutton@lucent.com
> ** Cc: ascend-users@bungi.com
> ** Subject: Re: (ASCEND) Max 1800 to WinNT routing
> **
> **
> ** Thanks for the info. I looked at the ascend notes at freeradius.org and
> ** have one last thing to try on this end and that is changing the 0.0.0.0
> ** below to his interface address.
> **
> ** --On Thu, 27 Apr 2000 11:53:32 +0100, James Courtier-Dutton said...
> ** > Your customer will have to adjust his end, and manually put in the
> ** > default gateway. When one changes IP address, one also has to
> ** change the
> ** > default gateway to point to the new address.
> ** > There is nothing your end which will set his default gateway. PPP does
> ** > not allow for it.
> ** > Just ask your customer to go into the static route settings and adjust
> ** > it.
> ** > Cheers
> ** > James
> ** >
> ** >
> ** > Earl Smith wrote:
> ** >>
> ** >> I have a customer that has been using a Pipe15 and NT to connect his
> ** >> small network to another provider and is moving to us. Everything
> ** >> worked fine at the previous provider but I cannot get him connected.
> ** >>
> ** >> Here is his entry in our users file:
> ** >>
> ** >> # For ISDN MP users
> ** >> DEFAULT Group = "MP", Simultaneous-Use = 2
> ** >> Fall-Through = 1
> ** >>
> ** >> puser Auth-Type = System
> ** >> Service-Type = Framed-User,
> ** >> Framed-Protocol = PPP,
> ** >> Framed-IP-Address = XX.XX.XX.193,
> ** >> Framed-Route = "XX.XX.XX.192/29 0.0.0.0 1",
> ** >> Framed-IP-Netmask = 255.255.255.248,
> ** >> Framed-MTU = 1500,
> ** >> Fall-Through = No
> ** >>
> ** >> He can connect and get the 193 address, I look in the 1800's routing
> ** >> tables and the route is there but on his end he doesn't have a gateway
> ** >> and therefore cannot go anywhere. I tried adding
> ** Ascend-Client-Gateway
> ** >> = XX.XX.XX.192 and XX.XX.XX.193 and the NAS address. We've tried
> ** >> server assigned and static IP settings in DUN for the connection.
> ** >>
> ** >> This setup is identical to my 3COM OC, Cisco and Pipe50
> ** users. What am
> ** >> I missing ? I find it is hard to believe there is a problem on
> ** >> his end as all he is doing is changing IP addresses from one subnet to
> ** >> another.
> ** >>
> ** >> --
> ** >> Regards,
> ** >>
> ** >> Earl
> ** >>
> ** >> ****************************************************
> ** >> Earl Smith Systems Administrator Parkcity Net
> ** >> Off: (435) 658-2398 x 204 Fax: (435) 658-0702
> ** >> PO Box 980654, Park City, UT 84098
> ** >> ***************************************************
> ** >> ++ Ascend Users Mailing List ++
> ** >> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> ** >> To get FAQ'd: <http://www.nealis.net/ascend/faq>
> ** >
> **
> ** ---End reply
> **
> ** --
> ** Regards,
> **
> ** Earl
> **
> ** ****************************************************
> ** Earl Smith Systems Administrator Parkcity Net
> ** Off: (435) 658-2398 x 204 Fax: (435) 658-0702
> ** PO Box 980654, Park City, UT 84098
> ** ***************************************************
> **
> **
> **
> ** ++ Ascend Users Mailing List ++
> ** To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> ** To get FAQ'd: <http://www.nealis.net/ascend/faq>
> **
>
---End reply
--
Regards,
Earl
****************************************************
Earl Smith Systems Administrator Parkcity Net
Off: (435) 658-2398 x 204 Fax: (435) 658-0702
PO Box 980654, Park City, UT 84098
***************************************************
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>