Re: (ASCEND) Software Release Request (Ascend Max 4xxx)

To: Randy Smith <ascend@lewiscounty.com>
Subject: Re: (ASCEND) Software Release Request (Ascend Max 4xxx)
From: Steve Hovey <shovey@buffnet.net>
Date: Thu, 3 Feb 2000 14:58:11 -0500 (EST)
cc: ascend-users@bungi.com
In-Reply-To: <00c701bf6e79$de037550$4f63a8d1@lewiscounty.com>
Sender: owner-ascend-users@max.bungi.com


No thats the kicker - I DO have them all specified.  Its like they stop
seeing their configs or something, or for brief moments.

On Thu, 3 Feb 2000, Randy Smith wrote:

> Only if you don't specify a slot on the channel. I generally set all my
> slots to 3 and they spread across the modems real well.
> 
> Randy Smith
> Tiger Mountain Technologies
> 
> ----- Original Message -----
> From: Daniel J. Vance <dvance@rvi.net>
> To: Steve Hovey <shovey@buffnet.net>
> Cc: Ascend List <ascend-users@bungi.com>
> Sent: Thursday, February 03, 2000 10:10 AM
> Subject: RE: (ASCEND) Software Release Request (Ascend Max 4xxx)
> 
> 
> > I was unaware that calls were routed to slot 9 unintentionally.  Has
> anyone
> > else seen this?
> >
> > -Daniel
> >
> > -----Original Message-----
> > From: Steve Hovey [mailto:shovey@buffnet.net]
> > Sent: Thursday, February 03, 2000 9:53 AM
> > To: Daniel J. Vance
> > Cc: Ascend List
> > Subject: RE: (ASCEND) Software Release Request (Ascend Max 4xxx)
> >
> >
> >
> > 6.1.7 - The connect rates are lower and more likely to drop, but at least
> > they dont get solid tones (routed to slot 9 as if an isdn call)
> >
> > On Thu, 3 Feb 2000, Daniel J. Vance wrote:
> >
> > > What version did you downgrade to?  We are using CT1s.
> > >
> > > -----Original Message-----
> > > From: Steve Hovey [mailto:shovey@buffnet.net]
> > > Sent: Thursday, February 03, 2000 9:36 AM
> > > To: Daniel J. Vance
> > > Cc: Ascend List
> > > Subject: RE: (ASCEND) Software Release Request (Ascend Max 4xxx)
> > >
> > >
> > >
> > > You dont get the solid tones or dead connects? (have you call tested
> with
> > > a phone?  I get them 1 in 4 to 8 tries, which is why I downgraded) or
> are
> > > you using pri's?
> > >
> > > On Thu, 3 Feb 2000, Daniel J. Vance wrote:
> > >
> > > > We are running 4048's and 6096's with 7.0.22.  I I have people
> > complaining
> > > > about disconnects...But I've pointed fingers at outdates drivers or
> > phone
> > > > lines.  I'm curious as to what people are running that is stable.
> > > >
> > > > Sincerely,
> > > > Daniel J. Vance
> > > >
> > > > -----Original Message-----
> > > > From: owner-ascend-users@max.bungi.com
> > > > [mailto:owner-ascend-users@max.bungi.com]On Behalf Of PowerNet
> > > > Sent: Thursday, February 03, 2000 5:29 AM
> > > > To: ascend-users@bungi.com
> > > > Subject: Re: (ASCEND) Software Release Request (Ascend Max 4xxx)
> > > >
> > > >
> > > > We are running 7.0.22 on a couple boxes.  I have noticed that a lot of
> > > users
> > > > are calling with disconnect problems.  We also only use CT1.  We
> > upgraded
> > > > from 7.0.4 which seemed not to work as well with some of the newer
> > modems,
> > > > but now others are having problems...
> > > > Catch 22.
> > > > What code to use?
> > > >
> > > > *********** REPLY SEPARATOR ***********
> > > >
> > > > On 2/3/00, at 1:33 AM, ascend@lewiscounty.com wrote:
> > > >
> > > > >We too had problems with analog callers connecting to 7.0.22. Some
> > worked
> > > > >great others that had worked well were screaming! We are currently
> > > running
> > > > >7.0.1 (4048 & 6000 chassis) and I've connected at 1200 - v.90 with no
> > > > >problems. We've been running it for months and works. We've been up
> 98
> > > days
> > > > >accros all my boxes at present. I had a generator glitch 98 days ago
> > that
> > > > >allowed all my boxes to reboot during an extended outage... other
> wise
> > > > we've
> > > > >seen up times of 180 plus days between reboots. We're  running CT1
> > verses
> > > > >PRI which I believe is why I can't run 7.0.22. Any one have any
> > thoughts
> > > on
> > > > >this therory?
> > > > >
> > > > >Randy Smith
> > > > >Tiger Mountain Technologies
> > > > >
> > > > >----- Original Message -----
> > > > >From: Pavane, Brian <brian.pavane@ggn.com>
> > > > >To: <ascend-users@bungi.com>
> > > > >Cc: Camas, Steve <Steve.Camas@ggn.com>; Smith, Kevin
> > > <Kevin.smith@ggn.com>
> > > > >Sent: Wednesday, February 02, 2000 2:33 PM
> > > > >Subject: (ASCEND) Software Release Request (Ascend Max 4xxx)
> > > > >
> > > > >
> > > > >> All,
> > > > >>
> > > > >> I'm looking for a stable release of software for the Max 4xxx that
> > will
> > > > >> support the entire range of dialup.  That includes analog
> (9600bps -
> > > > >v.90),
> > > > >> ISDN (56k, 64k, 56k Data Over Voice).  The reason I am asking this
> is
> > > > that
> > > > >> the release I'm currently running, 7.0.22, seems to be having a
> major
> > > > >issue
> > > > >> with analog modem calls.  What are people running out there?  Does
> > > anyone
> > > > >> know what software any of the "bigboys" run, if they even use the
> > > 4xxx's
> > > > >> anymore?  I'd be interested in the tales people tell of the
> diffrent
> > > > >> software releases, as finding a good software release from Ascend
> has
> > > > >always
> > > > >> seemed to be a bit of magic and luck.  Anyone know any releases to
> > stay
> > > > >away
> > > > >> from at all cost?  At least if I can narrow down the list, I may
> have
> > a
> > > > >> chance of picking something that works well.
> > > > >>
> > > > >> Thanks.
> > > > >>
> > > > >> Brian Pavane
> > > > >> NOC Support Staff
> > > > >> Gillette Global Network
> > > > >> (212) 897-8468 (Direct)
> > > > >>
> > > > >>
> > > > >> ++ Ascend Users Mailing List ++
> > > > >> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> > > > >> To get FAQ'd: <http://www.nealis.net/ascend/faq>
> > > > >>
> > > > >
> > > > >
> > > > >++ Ascend Users Mailing List ++
> > > > >To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> > > > >To get FAQ'd: <http://www.nealis.net/ascend/faq>
> > > > ++ Ascend Users Mailing List ++
> > > > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> > > > To get FAQ'd: <http://www.nealis.net/ascend/faq>
> > > >
> > > > ++ Ascend Users Mailing List ++
> > > > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> > > > To get FAQ'd: <http://www.nealis.net/ascend/faq>
> > > >
> > >
> > >
> > >
> >
> >
> > ++ Ascend Users Mailing List ++
> > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> > To get FAQ'd: <http://www.nealis.net/ascend/faq>
> >
> 
> 
> ++ Ascend Users Mailing List ++
> To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd:	<http://www.nealis.net/ascend/faq>
> 

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>

Follow-Ups:
- Re: (ASCEND) Software Release Request (Ascend Max 4xxx)
  - From: ascend@lewiscounty.com (Randy Smith)

References:
- Re: (ASCEND) Software Release Request (Ascend Max 4xxx)
  - From: ascend@lewiscounty.com (Randy Smith)

Prev by Date: (ASCEND) ISDN dovb call routing on high density csmx TNT's
Next by Date: Re: (ASCEND) ISDN dovb call routing on high density csmx TNT's
Prev by thread: Re: (ASCEND) Software Release Request (Ascend Max 4xxx)
Next by thread: Re: (ASCEND) Software Release Request (Ascend Max 4xxx)
Index(es):
- Date
- Thread