Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) 56K digital modems on a Max1800
At 01:06 PM 11/11/97 -0800, you wrote:
>At 04:52 PM 11/10/97 -0800, David Good wrote:
>>We just got an 8-modem 56K digital modem card for our Max 1800. We want to
>>use the Max to replace an old NetBlazer that we have. I updated the Max
>>firmware to 5.0Ap33 and installed the modems, but the modems can't seem to
>>dial out and don't answer when I try to dial in from an analog line. We've
>>been using the Max strictly for ISDN connections for over a year now and
>>that part still seems to be working OK. I can't find any instructions on
>>setting up the digital modems, so I'm assuming that there isn't anything to
>>be done. I can connect to the modems using the "open" command from the
>>terminal server and issue AT commands, the status display shows the
>>outgoing call, but less than 10 seconds later the call is terminated and I
>>get "NO CARRIER". I tried dialing our NetBlazer this way and the call
>>never made it to the modems on the NetBlazer. Am I missing something?
>
>Are your BRI lines provisioned for CSV as well as CSD (voice and data)?
>Maybe the calls are coming in as *apparent* data calls...since your ISDN
>has been working fine....?
>
>When you call in, what shows up on the status windows of the MAX console ?
Also...did you set the Ans #1 in the ethernet/mod config/wan options/
menu ? Maybe you're forcing the modem calls to be answered as DOSBS
unintentionally ?
Kevin
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
References: