Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Pipeline 75 voice problems
At 06:03 PM 11/21/97 -0500, Dwight Lindsey wrote:
>I've got several issues with some of our Pipeline 75s and voice.
OK, I can both help and relate to this ;-) I have a P75 at home..
>1) On at least one box, an analog phone plugged into the 2nd pots port
>gives a warble instead of a dial tone. Calling that number with an analog
>phone does not connect a voice call.
a) Do you have CSV = 2 in the telco provisioning (per the provisioning spec
on the WEB site, and in the ?manuals?).
b) Does the warbling sound like a British police siren ?
c) Is this also true when both channels are idle and available?
>2) With both B Channels running with data, a voice call gets a busy signal.
You should verify that you have ACO for that line. Without it, the *switch*
considers the lines busy and does not offer the call to the P75.
>The sales pitch I got, and the manuals, state that in this situation the
>Pipeline hangs up one of the data channels and accepts the voice call.
It should have a disclaimer that says *AS LONG AS YOUR LINE IS CORRECTLY
PROVISIONED* - as mine is ;)
> Doesn't
>happen that way. I would swear it's configured right.
The P75 probably is, it's usually the telco provisioning that needs checking.
See:
http://www.ascend.com/732.html
[find "provisioning" on www.ascend.com].
Kevin
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
References: