Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

(ASCEND) Radius dialout problem with 1800


I have configured our radius server to with a couple of dialout user
id's.

I see the routes load when I "Upd Rem Cfg". 

I see the radius daemon query for and receive the dialout user
information when I ping the remote site.

But the 1800 never appears to actually dial out.

If I configure this same site information in the 1800's built in
profiles, it works okay.

There must be a hidden switch in the 1800 that I have forgotten to
turn on to allow the dial out.  Any ideas?

This is one example dialout profile...

route-mitra-gw-1	Password = "xxxxx", User-Service = Dialout-Framed-User
	Framed-Route = "192.1.1.0/24 192.1.1.1 1 n plab-out"

plab-out Password = "xxxxxx"
	User-Service = Dialout-Framed-User,
	User-Name = "plab",
	Ascend-Dial-Number = "97465859",
	Ascend-Send-Auth = Send-Auth-None,
	Ascend-Metric = 1,
	Framed-Address = 192.1.1.1,
	Framed-Netmask = 255.255.255.0,
	Framed-Route = "192.1.1.0/24 192.1.1.1 1",
	Framed-Protocol = MPP,
	Framed-Compression = Van-Jacobsen-TCP-IP,
	Framed-Routing = None,
	Ascend-Data-Svc = Switched-modem,
	Ascend-Idle-Limit = 60,
	Ascend-Route-IP = Route-IP-Yes,
	Ascend-Idle-Limit = 60

# I have created this dial in user for this same account, but I don't
# know if it is actually needed by the 1800 or radius.  It is not
# needed by our site.
#
plab	Password = "yyyyy"
	User-Service = Framed-User,
	Framed-Protocol = MPP,
	Framed-Compression = Van-Jacobsen-TCP-IP,
	Framed-Address = 192.1.1.1,
	Framed-Netmask = 255.255.255.0,
	Framed-Route = "192.1.1.0/24 192.1.1.1 1",
	Ascend-User-Acct-Base = 10,
	Ascend-User-Acct-Host = gulper,
	Ascend-User-Acct-Port = 1646,
	Ascend-User-Acct-Type = Ascend-User-Acct-User,
	Ascend-User-Acct-Key = zzzzzz
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>