Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) K56..
On Fri, 28 Nov 1997, Greg Hale wrote:
>
>
>
> >Andy, I had the same problem with the Channelized T1s with both
> >AMI/SF and B8ZS/ESF. The Telco is using Northern Telecom DMS100
> >switches. The only way I could get anything at all higher than
> >33.6 was to replace the T1s with PRI circuits. I now get as
> >good as 48000 and have tried several K56Flex modems.
>
> I would be interested to know if anyone is getting higher connect speeds
> than 42000 with channelized T1's. The phone company above just probably
> didn't have their T1's set up properly. We had to add a 4db pad trunk to
> trunk on our Nortel DMS-10 before we could get any 56flex connection. This
> is not standard for a telephone company. Usually padding is added line to
> trunk on EAS and Toll trunks. If it is a phone company that is
The highest connection speed we have seen is a 44000 with a Boca 56k
modem. The average is 38000, and rarely a 44000. We are using
channelized T1s, and are colocated at the phoen company. They use Nortel
equipment, but I don't know specifics. However, our problem really isn't
connection speed, it is disconnections on speeds higher than 33.6.
Mitch Harhay
Access Nevada, Inc.
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
References: