Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Pipeline 50 V 6.0.2 resetting frequently
Drop into debug mode and type FAT this will show you the Fatal History
log please post output.
Jason Nealis
Director Internet Operations / Network Access
Erols Internet
On Tue, 5 May 1998, Florian Sauer wrote:
> Hello,
>
> we are using a Pipeline50 Software V 6.0.2 to connect a WIN NT machine to
> our ISP.
> The WIN NT has 2 NICs, 1 for our internal network, 1 for the external
> connection to the pipeline via a cross-over ethernet cable.
>
> Our problem is that the pipeline is resetting frequently a couple of times
> a day.
> Nobody so far was able to track down the problem.
> We have
> - changed the pipeline unit; the other machine showed the same behaviour
> - changed the NIC, no effect
> - changed the crossover cable, no effect
> - had software v 5.0, then upgraded to 6.0.2, no effect
>
> All we know is that the pipeline will only reset after ethernet traffic
> (for instance when opening a telnet session with the pipeline, but not
> always then)
>
>
> Does anybody have any ideas?
> Any help is greatly appreciated.
>
> Florian
>
> Florian Sauer M.A.
> musaion media production
> Lindpaintnerstr. 70
> D-70195 Stuttgart
> Tel +49-711-69795-40 Fax +49-711-69795-45
>
> eMail: florian.sauer@musaion.de
> Web: http://www.musaion.de
>
> ++ Ascend Users Mailing List ++
> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd: <http://www.nealis.net/ascend/faq>
>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
References: