Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Pipeline bridging/routing
At 01:31 PM 9/23/98 , Brad Vandrasik wrote:
>
>
>Okay, here's my setup:
>
>+-----------+ +------------+ +--------------+
>| Office | Ether | | Ether | Office |
>| P25 (A) |_______| Office LAN |________| P25 (B) |
>| (routing) | | | | (no routing) |
>+-----------+ +------------+ +--------------+
> | |
> | Route over ISDN | Bridge over ISDN
> | | (connection #2)
>+------------+ +--------------+
>| | Route over ISDN | Home |
>| ISP |____________________________| P75 |
>| | (connection #1) | (routing) |
>+------------+ +--------------+
> |
> | Ether
> |
> +------------+
> | |
> | Home LAN |
> | (1 PC) |
> +------------+
>
>1. Home P75 is setup with TCP/IP address and netmask as if on office LAN.
>2. Home PC is setup with TCP/IP address and netmask as if on office LAN,
> gateway set to Home P75.
>3. Connection #1 is made from Home P75 to ISP using NAT, works great.
>4. Connection #2 is made from Home 97 to Office P25 (B), works great.
>
>Here's the question/problem:
>When I am connected to the office LAN from home (connection #2), I would
>like
>to able to access the Internet using the route from Office P25 (A) to ISP.
Having the PC point to the P75 as it's gateway will defeat this, as the
P75 will try to route via connection #1.
>I tried setting up another gateway to Office P25 (A) on home PC and on Home
>P75,
>but I cannot "see" (I.E. ping) Office P25 (A).
I cannot see why this part (the PING) would not work unless you have some
kind of filters setup between the home PC and the P25 (A)....
>Please, someone tell me if I can do this, and, if so, what I am ommiting or
>doing wrong.
When you setup the second gateway on the home PC, did that replace the
original one? When setup with the office connection, can you ping the
devices between the PC and the P25 (A)?
Kevin Smith (kevin@ascend.com)
Ascend Communications...
...where Network Solutions never end.
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
References: