Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Re: static IP on max?
Thanks... this did the trick.
The first thing I tried was an IP that wasn't in any of the pools, but
I think my profile wasn't complete. In any event, this works
perfectly. Thanks for the help...
On Mon, Sep 28, 1998 at 09:51:22AM +0200, Martin Ginkel wrote:
>
> Hello,
>
> The address has to be in n o n e of the defined pools.
> This Profile works with static IP:
>
> user Password = "pass"
> User-Service = Framed-User,
> Ascend-Maximum-Channels = 1,
> Framed-Protocol = PPP,
> Framed-Address = 194.45.154.67,
> Framed-Netmask = 255.255.255.255,
> Ascend-Metric = 7,
> Framed-Routing = None,
> Ascend-Idle-Limit = 900
>
> Best Regards
> Martin Ginkel
>
> On 26-Sep-98 alex@crawfish.suba.com wrote:
> > I can't get static IP to work on my max.
> >
> > I'd like most of my users to have dynamic IP, and a few to have static
> > IP address. The dynamic IP works fine. I'm using a pool of IP
> > addresses defined on the max to supply addresses.
> >
> > When I add a static IP address for a user in the radius users file,
> > that's the address the caller gets, but the caller can't communicate
> > with anyone. I can't even ping the dialup client from the max.
> >
> > The static IP addresses aren't in the first pool -- is that the
> > problem? I'm afraid of running into problems if the max gives out
> > someone's static IP dyanmically to somone else. I put them in a
> > second pool, hoping that the max would start routing the addresses,
> > but it didn't work.
> >
> > Any help will be very much appreciated...
> > ++ Ascend Users Mailing List ++
> > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> > To get FAQ'd: <http://www.nealis.net/ascend/faq>
>
> Netzwerkadministrator MDlink online service center Tel: +49 391 2556882
>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
References: