Re: [Fwd: (ASCEND) Nailed NAT]

[Bob K <melange@yip.org>]

---
Date: Fri, 05 Mar 1999 14:42:25 +0000
From: Anthony Chatman <anthony@edge.net>
To: scott.kozicki@bluestar.net
Subject: Re: (ASCEND) Nailed NAT

[snip]
Another more recommended solution is go under ethernet -> nat -> nat ->
static mappings and setup port 21 to port 21 with their lan address
under loc adrs, this will cause any incoming connections to port 21 on
the pipeline to be sent to the pipeline itself on port 21 therefore
enabling telnet. I've included a static mapping below.
[snip]
---

Er, telnet is port 23.  Port 21 is ftp-control.


---
[snip]
For example a pipeline that is configured for NAT that has a lan adress
of 10.0.0.1

ethernet -> nat -> nat -> static mappings

Valid=Yes
Dst Port#=21
Protocol=TCP
Loc Port#=21
Loc Adrs=10.0.0.1

would allow you to telnet to the pipeline.
---

So if one changes the Dst & Loc ports above to 23, it should work.
/etc/services can be handy...

melange@yip.org - Shave A Tree Today! (TM)

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>