Re: (ASCEND) IP Pool Problem

[Vincent Tse <vincent_tse@yahoo.com>]

Check your MAX->Mod Config->WAN options->Pool only=Yes

Regards,
Vincent

---Gerhard Poul <gp@atnet.at> wrote:
>
> Hi,
> 
> We have a little problem at the moment with a new MAX 4030. (It
never worked
> for us.. it's new..)
> 
> Every time a user logs in he gets IP Address 0.0.0.0 regardless what
I'm
> configuring... :(((
> 
> Here is a little screenshot about what happens:
> 
> [gp@gerhard gp]$ telnet max2.vbs.at 6150
> Trying 195.230.54.67...
> Connected to max2.vbs.at.
> Escape character is '^]'.
> Vienna Dialin Service
> 
> login: tester9@servus.at
> tester9@servus.at
> Password: secret!
> 
>     Entering PPP Mode.
>     IP address is 0.0.0.0
>     MTU is 1524.
> [a PPP sequence which is hard to paste into my mua ;-))) ]
> 
> I have defined the following pools:
> 
> Pool#                Base         Count      InUse
>    1                   0.0.0.0       0          0
>    2                   0.0.0.0       0          0
>    3                   0.0.0.0       0          0
>    4                   0.0.0.0       0          0
>    5                   0.0.0.0       0          0
>    6                   0.0.0.0       0          0
>    7                   0.0.0.0       0          0
>    8                   0.0.0.0       0          0
>    9                   0.0.0.0       0          0
>    10                  0.0.0.0       0          0
>    11                  0.0.0.0       0          0
>    12                  0.0.0.0       0          0
>    13                  0.0.0.0       0          0
>    14           195.230.56.240      16          0
> 
>  Number of remaining allocated addresses:    0
> 
> I made a dump of a package which is produced by the diagnostics mode
if a
> try to log in. Please notice that there is an attribute 218, len 6,
00 00 00
> 0e and 0e should be 14 and attribute 218 is 'Ascend-Assign-IP-Pool'.
I think
> it should work :(
> 
> RADIF: authenticating <17:tester9@servus.at> with PAP
> RADIF 23:15:20> _radiusRequest: id 20, user name
<18:tester9@servus.at>
> RADIF: _radiusReq: challenge len = <0>
> RADIF: _radiusReq: socket 6 len 90 ipaddr 194.152.167.213 port
65534->1812
> RADIF:_radiusReq: id 20 <18:tester9@servus.at>, starting timer (20
sec)
> RADIF: _radCallback: buf=B0591960 from 194.152.167.213 1812
> RADIF: _radCallback, authcode = 2, id 20
> RADIF: _radCallback: id 20, killing timer
> RADIF: Authentication Ack
> RADIF: attribute 6, len 6, 00 00 00 02
> RADIF: attribute 218, len 6, 00 00 00 0e
> RADIF: attribute 13, len 6, 00 00 00 01
> RADIF: attribute 7, len 6, 00 00 00 01
> RADIF:_freeInfoClassSess
> RADIF: radius type Acct ID = 165
> RADIF: _radiusAcctRequest: type 0 id 165, user name
<18:tester9@servus.at>
> RADIF: _radiusAcctReq: socket 9 len 112 IP 194.152.167.213 port
1027=>1813, ID=165
> RADIF: _radCallback: buf=B0539BE0 from 194.152.167.213 1812
> RADIF: _radProcAcctRsp: user:<18:tester9@servus.at>, ID=165
> RADIF: _radProcAcctRsp, bad authenticator for buffer B0539BE0
> RADIF: _radCallback: processed acct server type=0
> RADIF: radius type Acct ID = 166
> RADIF: _radiusAcctRequest: type 0 id 166, user name
<18:tester9@servus.at>
> RADIF: _radiusAcctReq: socket 9 len 196 IP 194.152.167.213 port
1027=>1813,
> ID=166
> RADIF: _radCallback: buf=B04F5B60 from 194.152.167.213 1812
> RADIF: _radProcAcctRsp: user:<18:tester9@servus.at>, ID=166
> RADIF: _radProcAcctRsp, bad authenticator for buffer B04F5B60
> RADIF: _radCallback: processed acct server type=0
> 
> I hope it's possible for someone to help me... :-(((
> 
> regards,
>   gerhard
> ++ Ascend Users Mailing List ++
> To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd:	<http://www.nealis.net/ascend/faq>
> 

_________________________________________________________
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>