Re: (ASCEND) static addressing

[Network Operations Center <noc@anc.net>]

You will need to use some kind of dynamic routing protocol
to advertise the customer's static route to your border
router.  Use RIPv2 or OSPF and pass the customers netblock
to your border router.

If you have a static route configured on your border router
which points to max1, then when the customer connects to max2
your routing will break.  That is consistant with the 
symptoms you have described below.


At 09:55 AM 3/12/99 -0500, Rob Marlowe wrote:
>-----BEGIN PGP SIGNED MESSAGE-----
>Hash: SHA1
>
>I've got two identically configured Max 4048's running 6.1.3 ftik.m40.
>(I saved the configuration on the one that was working, changed it's
>IP address and loaded it to the Max that isn't allowing the customer
>described below to work.  With these essentially identical Maxes, the
>problem persists.)
>
> I've got a customer who needs a static address block.  When he
>connects to one max, everything works fine.  When he connects to the 
>other, he can see a couple of web servers on our ethernet, but can not
>see our border router.  The border router is configured to send
>everything within our Class C's to the ethernet and everything else
>out the serial line to the DSU.
>
>Doing a traceroute from another machine on my ethernet to the
>customer's machine when the link is not working results in a loop
>between the border router and the max.
>
>I've got the customer's static address and netmask defined in the
>RADIUS users file using the Framed-IP-Address and Framed-IP-Netmask
>parameters.  I'm using Ascend Access Control for authentication.
>
>My other customers are using dynamic addressing and each Max has it's
>own pool of IP addresses to draw from.  We do NOT have routing issues
>with dynamically addressed customers, including the static address
>customer when we give him a dynamic address.
>
>The customer is using a Pipeline 75.
>
>Suggestions as to where to look next would be greatly appreciated.
>-----BEGIN PGP SIGNATURE-----
>Version: PGP for Personal Privacy 5.5.3
>
>iQA/AwUBNukqrwxjUXeBFt8rEQI+jwCeOTllQFi48Msljdtd4+hnboQ5BkwAmwZu
>LALV4qPWsvECsUcrarDqTH/j
>=JuTo
>-----END PGP SIGNATURE-----
>
>+----------------------------------------------------------------------+
>| Rob Marlowe                                          rob@marlowe.net |
>| Marlowe & Associates				       (727) 845-0893  |
>| P.O. Box 1058, New Port Richey, FL 34656-1058                        |
>+----------------------------------------------------------------------+
>++ Ascend Users Mailing List ++
>To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
>To get FAQ'd:	<http://www.nealis.net/ascend/faq>


++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>