Real Time Ascend Maling List Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ASCEND) 7.2.3 for the Max




3 and 4 CT1's per box actually. This particular one has 3 switched CT1's
and one nailed T1 for connectivity.

andy

On Wed, 29 Sep 1999, Jason Nealis wrote:

> 
> 2 PRI's per box?
> 
> Jason
> 
> 
> On Wed, Sep 29, 1999 at 08:11:13PM -0500, Andy Walden stated
> > 
> > Like I said, no obvious complaints. Sure we have issues with modems
> > occasionally, but its usually worked out with a flash upgrade or the like.
> > Currently here are a list of the speeds connected now, sorted by speed.
> > Majority of connections are decent as far as I'm concerned. I do only run
> > analog on my 4xxx's and no stacking or anything else weird.
> > 
> >   14400 14400 PPP        
> >   14400 14400 PPP        
> >   21600 16800 PPP        
> >   26400 24000 PPP      
> >   26400 24000 PPP        
> >   26400 26400 PPP      
> >   26400 26400 PPP      
> >   26400 26400 PPP        
> >   26400 26400 PPP        
> >   26400 28800 PPP      
> >   26400 28800 PPP        
> >   28800 24000 PPP        
> >   28800 26400 PPP      
> >   28800 28800 PPP      
> >   28800 28800 PPP        
> >   36000 28800 PPP        
> >   36000 33600 PPP        
> >   36000 28800 PPP        
> >   36000 28800 PPP        
> >   36000 26400 PPP      
> >   40000 26400 PPP        
> >   40000 26400 PPP        
> >   40000 28800 PPP      
> >   40000 26400 PPP        
> >   40000 26400 PPP        
> >   42000 26400 PPP        
> >   42000 26400 PPP        
> >   42000 26400 PPP        
> >   42000 28800 PPP        
> >   42667 26400 PPP        
> >   44000 26400 PPP        
> >   45333 24000 PPP        
> >   46000 24000 PPP      
> >   46000 28800 PPP      
> >   46000 28800 PPP      
> >   46667 26400 PPP        
> >   48000 24000 PPP           
> >   48000 24000 PPP      
> >   48000 26400 PPP      
> >   48000 26400 PPP      
> >   49333 24000 PPP      
> >   49333 26400 PPP      
> >   49333 26400 PPP        
> >   49333 28800 PPP        
> > 
> > 
> > 
> > On Wed, 29 Sep 1999, Jason Nealis wrote:
> > 
> > > 
> > > 
> > > Well, I have to ask, there has been a number of modem enhancements since that code that
> > > stabilizes out V.90 and addresses some X2 compatibility issues in regards to working with V.90? So 
> > > why not upgrade?
> > > 
> > > Unless your only running V.34? 
> > > 
> > > Jason Nealis
> > > RCN
> > > 
> > > 
> > > On Wed, Sep 29, 1999 at 03:56:34PM -0500, Andy Walden stated
> > > > 
> > > > My $.02 :)
> > > > 
> > > > ts-4% sh uptime
> > > > system uptime: up 485 days, 4 hours, 8 minutes, 8 seconds 
> > > > 
> > > > Software +6.1.0+
> > > > 
> > > > --
> > > > -----------------------------------------------------------------------
> > > > Andy Walden                        Work Email: andy@mtco.com.
> > > > Network Administrator, 		   Pers Email: andy@netimagination.com.
> > > > MTCO Communications		   Phone: (800) 859-6826
> > > > "A little nonsense now and then, is relished by the wisest men."
> > > > 						-Willi Wonka
> > > > 
> > > > 
> > > > On Wed, 29 Sep 1999, Oliver J Albrecht wrote:
> > > > 
> > > > > Hi,
> > > > > 
> > > > > In article <70955c70e713@news.allcon.net> you wrote:
> > > > > 
> > > > > >Interesting, thought 7.0.x was the last release for the 40xx series...  How
> > > > > >about a 6.1.xx update that includes the updated modem code?  Our WinModem
> > > > > >users are non-too-happy with Ascend since that is the only person we can
> > > > > >blame for the lack of updates in this branch.  Now, if 7.2.x will run on the
> > > > > >40xx, that may be an option, but I suggest everyone wait 6-8 months for the
> > > > > >bugs to be ironed out, it tends to take that long.
> > > > > 
> > > > > Why not use 7.0.X on the 4000? Depending on you configuration, 7.0.4 
> > > > > will probably be just fine. It ran without problems for over 4 months
> > > > > on all our Maxen (2000 through 6000), until we updated them today to
> > > > > run 7.0.22 (the 4000's) and 7.2.3 (the rest). YMMV...
> > > > > 
> > > > > FWIW, if I remember right, 6.1.X included the infamous HDLC zombie bug
> > > > > up to around 6.1.7. Was that ever fixed in that branch? I remember we
> > > > > went right to the 7.0 betas due to this one. 7.0.4 was definitely the
> > > > > most stable release we ever ran on an Ascend box so far.
> > > > > 
> > > > > -- 
> > > > > Oliver J. Albrecht      AllCon GmbH        http://www.allcon.net/
> > > > > Network Administration  Westerallee 139    Tel:  +49 461 90393-0
> > > > > olli@spike.allcon.net   D-24941 Flensburg  Fax:  +49 461 90393-33
> > > > > ++ Ascend Users Mailing List ++
> > > > > To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
> > > > > To get FAQ'd:	<http://www.nealis.net/ascend/faq>
> > > > > 
> > > > 
> > > > ++ Ascend Users Mailing List ++
> > > > To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
> > > > To get FAQ'd:	<http://www.nealis.net/ascend/faq>
> > > > 
> > > 
> > > -- 
> > > Jason Nealis
> > > Director of Internet Operations
> > > RCN 
> > > 
> > 
> 
> -- 
> Jason Nealis
> Director of Internet Operations
> RCN 
> 

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>