Real Time Ascend Maling List Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Pipeline 85 Cause Code Question
Still, the phone number either exists or doesn't. It doesn't exists
depending on the type of call. If the call type were wrong or
unsupported he should be getting something else, like 65
(Bearer service not implemented)
-Phil
> its been a while but memory says there is something about voice over data.
> A configuration parameter which would set the voice bit on the call.
> This is not valid at 64k only 56k. You can have 56k ISDN w/o voice bit
> I believe.
> Check the line parameters on the pipeline
>
> On Mon, 27 Mar 2000, Randy Snow wrote:
>
> > Thank you Phillip. Considering the fact that my office Pipeline 50 works
> > just fine with the same number, I'll assume it's the phone companies problem
> > and give them a call. At least I know what the message means now. :)
> >
> > -----Original Message-----
> > From: Phillip Vandry [mailto:vandryp@psi.ca]
> > Sent: Monday, March 27, 2000 3:35 PM
> > To: Randy Snow
> > Cc: ascend-users@bungi.com
> > Subject: Re: (ASCEND) Pipeline 85 Cause Code Question
> >
> >
> > > I have a pipeline 85 that works fine at 56k. When I increase the speed to
> > > 64k it shoots back the following error:
> > >
> > > Cause Code 01 - Unallocated (unassigned) number
> > >
> > > Testing the unit, packets are successfully transmitted when set to 64K.
> > >
> > > So, what exactly does this error tell me? I see the 'Unallocated
> > > (unassigned) number' in the manual, but what exactly does this mean?
> >
> > It means it's a wrong number, simply. (The ISDN equivalent of getting the
> > recorded message "The number you have dialed is not in service" on an analog
> > line)
> >
> > The fact that the number works at 56K but not at 64K indicates to me that
> > there's something seriously wrong with your telco's network, or your ISP's
> > telco's network.
> >
> > -Phil
> > ++ Ascend Users Mailing List ++
> > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> > To get FAQ'd: <http://www.nealis.net/ascend/faq>
> >
>
>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>