RE: (ASCEND) Pipeline 85 Cause Code Question

[Dana Hudes <dhudes@hq.smartworld.net>]

its been a while but memory says there is something about voice over data.
A configuration parameter which would set the voice bit on the call.
This is not valid at 64k only 56k. You can have 56k ISDN w/o voice bit
I believe.
Check the line parameters on the pipeline

On Mon, 27 Mar 2000, Randy Snow wrote:

> Thank you Phillip.  Considering the fact that my office Pipeline 50 works
> just fine with the same number, I'll assume it's the phone companies problem
> and give them a call.  At least I know what the message means now. :)
> 
> -----Original Message-----
> From: Phillip Vandry [mailto:vandryp@psi.ca]
> Sent: Monday, March 27, 2000 3:35 PM
> To: Randy Snow
> Cc: ascend-users@bungi.com
> Subject: Re: (ASCEND) Pipeline 85 Cause Code Question 
> 
> 
> > I have a pipeline 85 that works fine at 56k.  When I increase the speed to
> > 64k it shoots back the following error:
> > 
> > Cause Code 01 - Unallocated (unassigned) number
> > 
> > Testing the unit, packets are successfully transmitted when set to 64K.
> > 
> > So, what exactly does this error tell me?  I see the 'Unallocated
> > (unassigned) number' in the manual, but what exactly does this mean?
> 
> It means it's a wrong number, simply. (The ISDN equivalent of getting the
> recorded message "The number you have dialed is not in service" on an analog
> line)
> 
> The fact that the number works at 56K but not at 64K indicates to me that
> there's something seriously wrong with your telco's network, or your ISP's
> telco's network.
> 
> -Phil
> ++ Ascend Users Mailing List ++
> To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd:	<http://www.nealis.net/ascend/faq>
> 

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>