Real Time Ascend Maling List Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: (ASCEND) Takes soooo long to here the first beep.



On Wed, 29 Mar 2000, Daniel J. Vance wrote:

> I have 96 modems and 4 CT1s...

Are all your modems on and avaiable for incoming calls?
Sounds like they arent.

> 
> ----------------------------------------------
> Daniel J. Vance       | dvance@rvi.net
> Systems Administrator | http://www.adninternet.com
> 541-472-0733          | ADN Internet, Inc. (ASN 14342)
> 
> 
> -----Original Message-----
> From: Jake Messinger [mailto:jake@advamed.com]
> Sent: Wednesday, March 29, 2000 2:35 PM
> To: Daniel J. Vance
> Cc: Steve Hovey; Ascend List
> Subject: RE: (ASCEND) Takes soooo long to here the first beep.
> 
> 
> On Wed, 29 Mar 2000, Daniel J. Vance wrote:
> 
> > The strange thing about the long pause is that I see the call coming into
> > the max instantly after I dial into the max...  So the call is passed off
> > from the switch to my max very quickly.
> 
> Hrm, then it sounds like a max issue and not a fone co issue. When did it
> start doing this? You sure you have enough modems for the channels?
> 
> >
> > Hmm...I'm running 7.0.22...Should I maybe downgrade?
> >
> > -Daniel
> >
> > ----------------------------------------------
> > Daniel J. Vance       | dvance@rvi.net
> > Systems Administrator | http://www.adninternet.com
> > 541-472-0733          | ADN Internet, Inc. (ASN 14342)
> >
> >
> > -----Original Message-----
> > From: Steve Hovey [mailto:shovey@buffnet.net]
> > Sent: Wednesday, March 29, 2000 1:03 PM
> > To: Daniel J. Vance
> > Cc: Ascend List
> > Subject: Re: (ASCEND) Takes soooo long to here the first beep.
> >
> >
> >
> > A long pause can be due to a slow hunt group at the telco.
> >
> > Solid tone is ISDN, caused if the ascend cant find a modem it considers
> > available (theoretically anyways, I had this happen for no particular
> > reason I could pin point on anything higher that os 6.1.7 ro I run 6.1.7)
> >
> > On Wed, 29 Mar 2000, Daniel J. Vance wrote:
> >
> > > When I dial into my max, it takes like up to 20 seconds before I here
> the
> > > initial tone.
> > >
> > > Any reason why this would happen?  Also, I have customers complaining
> that
> > > they hearing solid tones that never quit....Just a solid tone.
> > >
> > > -Daniel
> > >
> > > ----------------------------------------------
> > > Daniel J. Vance       | dvance@rvi.net
> > > Systems Administrator | http://www.adninternet.com
> > > 541-472-0733          | ADN Internet, Inc. (ASN 14342)
> > >
> > > ++ Ascend Users Mailing List ++
> > > To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
> > > To get FAQ'd:	<http://www.nealis.net/ascend/faq>
> > >
> >
> >
> > ++ Ascend Users Mailing List ++
> > To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
> > To get FAQ'd:	<http://www.nealis.net/ascend/faq>
> >
> 
> --
> ~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~
> Jake Messinger, VP.	ph:713-772-6690		Visit:	portmasters.com
> AMS, Inc.		fx:713-774-3498 		advamed.com
> 8300 Bissonnet  #400	jake@advamed.com,ICQ# 4403734	disc.cba.uh.edu
> Houston, Texas  77074	www.advamed.com/~jake		jakes.org
> 
> Adjunct Professor	University of Houston, CBA	 jake@uh.edu
> ~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~
> 
> 		INVENTOR OF the _.,-*~''~*-,._ SQUIGGLES (c) 1978
> 
> 

-- 
~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~
Jake Messinger, VP.	ph:713-772-6690		Visit:	portmasters.com
AMS, Inc.		fx:713-774-3498 		advamed.com
8300 Bissonnet  #400	jake@advamed.com,ICQ# 4403734	disc.cba.uh.edu
Houston, Texas  77074	www.advamed.com/~jake		jakes.org

Adjunct Professor	University of Houston, CBA	 jake@uh.edu
~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~

		INVENTOR OF the _.,-*~''~*-,._ SQUIGGLES (c) 1978

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>