Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Re: NAS-Port-Type
At 05:21 PM 11/19/97 -0600, David Routh wrote:
>At 10:22 AM 11/18/97 -0800, you wrote:
>>At 05:35 AM 11/18/97 -0600, David Routh wrote:
>>>Hello,
>>>
>>>We're using Radius to authenticate with on Max4048's and are trying to
>>>implement the NAS-Port-Type for ISDN customers.
>>>
>>>Whenever we put NAS-Port-Type in the users file for a customer we get an
>>>error message from Radius saying something to the effect of "configuration
>>>mismatch 2 !=1". I'm assuming it's because we don't have the configuration
>>>in the Max's set right. ISDN customers dial in OK with the NAS-Port-Type
>>>left out of the users file but we'd like to be able to restrict modem users
>>>to modems and ISDN to ISDN.
>>
>>What is your check-item set to in RADIUS?
>>
>>I would expect you need:
>>
>>NAS-Port-Type = ISDN-Sync
>>
>>
>
>Yep, that's it... and that's what has me puzzled. I thought it must be a
>config problem on my part but...
Is ths MAX on a PRI or CT1 line ? Have you tried instead:
NAS-Port-Type = Sync
Which I guess would be the case for non-ISDN lines, as a CT1 may not be able
to discriminate.....I'll look into what is supposed to be the difference
between "Sync" and "ISDN-Sync"....
>It finally accepted the NAS-Port-Type once I put User-Service on the first
>line and NAS-Port-Type on the second line.... but shouldn't it keep the
>customer from dialing in on a modem when the NAS-Port-Type is set to
>ISDN-Sync?
Only when set as a check-item on the first line. Putting it on line 2 has no
real effect.
Kevin
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
Follow-Ups: