Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Multi-ip NAT problems
Pipeline 75
Eth0 = 192.168.1.1
Wan0 = Dynamic IP
I assume you've set a route on your linux box to 192.168.1.1, check to make
sure your pipeline is setting its default gateway correctly from the
dynamic ip. Drop down to console, and type "iproute show" (forgive me if I
get the commands wrong). Through PPP/MP/MPP negotiation your IP will assign
a gateway; by setting this to your P75's default gateway I bet it will work.
Please correct me if I'm wrong.
At 09:55 AM 9/15/98 -0500, you wrote:
>Hello,
>I am having problems with Multi-IP NAT on my Ascend P75 (I think rev
>6.1.0). I have purchased the right to
>use only one dynamic assigned IP from my ISP. So I only get my first
>one-to-one IP mapping on dialout. But I want to
>get around issues with some UDP based apps. So I use the following setup.
>
> clients on net 192.168.2.0/24 <-> 192.168.2.1 <-> Linux
>Router<->192.168.1.2<->
> net 192.168.1.0/24<->192.168.1.1<->P75<->dynamic ip
>from isp
;-----------------------------------------------
cwd ; "Do or do not. There is
xor ax,dx ; no try." Yoda
sub ax,dx ;
mov Power,ax ; plexus@seanet.com
;-----------------------------------------------
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
References: