Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) DAMN 6.1.7
Not sure that the mutliple types of service is it either....we have 2 Max
4004's running 6.1.7 and running Frame Relay, ISDN, and 56K modems and
have had no problems (occasionally a customer says it takes 3 or 4 times to
dialup and get it to verify them, but...). We have had no problem with our
ISDN connects or anything else...
Jim Williams
At 10:39 AM 9/22/98 -0400, you wrote:
>The problem appears to me to be that if you are running a Max in any form
>other than just one type of service, like modems, you will have problems.
>
>
>I have an 1800 and a 2024 running K56Flex and 6.1.0. I have never had
>problem one with them. They also are just used for inbound modems. No
>ISDN, Stacking, OSPF, Frame, DHCP, or Firewall. Just inbound modems
>authenticated via RADIUS.
>
>I also have 1800 running 6.1.0 that are just ISDN in only. Again, no
>problems and many have been up for several months.
>
>However, my 4000s choke or puke on everything since 6.0.0. I was running
>6.1.3 and it was fairly stable, however it started getting slower over time.
>So I tried 6.1.7, ISDN customers stopped working all together and I droped
>back to 6.1.0, since I had good luck with it on all my other Max-es running
>it... Well, I was informed of problems with 6.1.0 by other readers and
>they were right. After about 5 days, it stops authenticating ISDN users
>and then soon after stops authenticating modem users. I guess it is back
>to 6.1.3. The slow down took almost a month to kick in. I would rather
>reboot every 20 days than every 5... I would really rather not reboot
>at all. :)
>
>On Mon, 21 Sep 1998, Cliff Emberg wrote:
>
>>
>> Makes me wonder what we are doing right...
>>
>> Max 4048, 6.1.7, 37.5 days uptime, no mem or pool leaks,
>> no fe's, warnings, or reboots.
>>
>> No ospf or stacking, just modem users, has ~40 users on
>> during peak times.
>>
>++ Ascend Users Mailing List ++
>To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
>To get FAQ'd: <http://www.nealis.net/ascend/faq>
>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
Follow-Ups:
References: