Real Time Ascend Maling List Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ASCEND) Dial out via MAX



You need to check and make sure you have Use Trunk Grps=yes and you will
have to
put in 9 (or what ever you set the trunk grp to) in front of the number
dialed.  You might
also want to check and make sure you have a two way PRI.  I know a lot of
companies
are offering discounts on PRI's with inbound only.


----- Original Message -----
From: Kinchen, Tyler (NSTS.JAX) <TKincher@NA2.US.ML.com>
To: <ascend-users@bungi.com>
Sent: Friday, November 05, 1999 10:08 AM
Subject: (ASCEND) Dial out via MAX


> I'm trying to get dialout setup for a MAX 4004 and am unable to get
> it working.  I have the Modem dialout=yes set and Immediate Modem is on.
I
> have a port set for the Immediate Modem and no password.  When I telnet
into
> the MAX on that port, I get the "Ascend modem pool server" "Server ready."
> and "Connected to modem x:x..."  We have two PRI's into the MAX and they
are
> in a hunt group but each has it's own seperate number that you can dial
> into.  Dial in works fine.  Only the second PRI is set to handle dialout.
> After the connected to modem x:x, I type atdt and the phone number and it
> comes back with a NO CARRIER result. You do not need to dial a 9 or
anything
> else.  The only thing I can think of is maybe it's trying to dialout on
the
> first PRI.  How do the channels on a PRI get assigned to modems in the
MAX?
> Does the MAX just grab the first open channel on the first available PRI
and
> use that?  The MAX is running firmware 6.1.24.  Any ideas or pointers to
> links on this would be GREATLY appreciated.  I've searched through the
> archives for this list and could not find anything.  TIA.
>
> Regards,
>
> J. Tyler Kinchen
> @:tyler_kinchen@ml.com
>
>
> ++ Ascend Users Mailing List ++
> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd: <http://www.nealis.net/ascend/faq>

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>