(ASCEND) Telco not able to get wink-start?

["Dennis Duval" <skipmax@seacove.net>]

Hi

I am setting up a new dial-up service using SW Bell.  I had originally
requested T1/PRI but was later informed that the only T1 service I would be
able to get is something they call a 'digital loop' T1.  Now I have moved a
Max 4000 over to the new location and I believe I have it configured
correctly to accept their digital loop service.

The technician at the CO is telling me that they are unable to get the
wink-start that they need from my Max.  What I hear when I dial in is a fast
busy.  The Max is recognizing the incoming call, but drops it almost
immediately and is not giving me any indication of a reason that I can see.

All of my previous experience in setting up Maxens has been on Sprint T1s.
I have never had to tell Sprint how many digits (of the incoming phone call)
I am looking for, but the SW Bell tech is asking for this information.  This
line is to be used for only incoming calls.

I am using only a local profile on the Max for authentication, to simplify
troubleshooting.

I have the following settings in the Line configuration:

Sig Mode=Inband
Rob Ctl=Wink-Start
Framing Mode=ESF
Encoding=B8ZS

Below is the log from ONE single dial-in attempt:

Sep  8 17:37:17 max1 ASCEND: slot 0 port 0, line 1, channel 23, Incoming
Call, MBID 140 [MBID 140]
Sep  8 17:37:17 max1 ASCEND: slot 8 port 4, Assigned to port, MBID 140 [MBID
140]
Sep  8 17:37:18 max1 ASCEND: slot 0 port 0, line 1, channel 22, Incoming
Call, MBID 141 [MBID 141]
Sep  8 17:37:18 max1 ASCEND: slot 8 port 7, Assigned to port, MBID 141 [MBID
141]
Sep  8 17:37:19 max1 ASCEND: slot 8 port 4, line 1, channel 23, Call
Connected, MBID 140 [MBID 140]
Sep  8 17:37:19 max1 ASCEND: call 4 AN slot 8 port 4 56KR
Sep  8 17:37:19 max1 ASCEND: call 4 CL 0K   c=185 p=10
Sep  8 17:37:19 max1 ASCEND: slot 8 port 4, line 1, channel 23, Call
Disconnected [MBID 140]
Sep  8 17:37:19 max1 ASCEND: slot 8 port 4, Call Terminated [MBID 140]
Sep  8 17:37:19 max1 ASCEND: slot 8 port 7, line 1, channel 22, Call
Connected, MBID 141 [MBID 141]
Sep  8 17:37:20 max1 ASCEND: call 5 AN slot 8 port 7 56KR
Sep  8 17:37:20 max1 ASCEND: call 5 CL 0K   c=185 p=10
Sep  8 17:37:20 max1 ASCEND: slot 8 port 7, line 1, channel 22, Call
Disconnected [MBID 141]
Sep  8 17:37:20 max1 ASCEND: slot 8 port 7, Call Terminated [MBID 141]

If anyone has had a similar problem or has suggestions I would be grateful
for any comments.

Dennis Duval
Cove Internet, Inc.



++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>