RE: (ASCEND) Dialing to Max 6000 using a IOS Router

["Troy Settle" <troy@picus.com>]

Here's the config I use to connect my Cisco 804 to an Ascend 1800. Shouldn't
be any different for the Cisco 1600 dialing to an Ascend 6000.

interface BRI0
 no ip address
 no ip directed-broadcast
 encapsulation ppp
 dialer pool-member 1
 isdn switch-type basic-ni
 isdn spid1 54063358200101 5820
 isdn spid2 54063358210101 5821
 ppp multilink
!
interface Dialer1
 ip address negotiated
 no ip directed-broadcast
 no ip proxy-arp
 encapsulation ppp
 no ip split-horizon
 dialer remote-name isdn-02.rad
 dialer idle-timeout 2147483
 dialer string 4908
 dialer string 4909
 dialer hold-queue 10
 dialer load-threshold 1 either
 dialer pool 1
 dialer-group 1
 pulse-time 0
 ppp pap sent-username foo password 7 XXXXXXXXXXXX
 ppp multilink



** -----Original Message-----
** From: owner-ascend-users@max.bungi.com
** [mailto:owner-ascend-users@max.bungi.com]On Behalf Of Berardo Bonaduce
** Sent: Tuesday, March 28, 2000 1:29 PM
** To: ascend-users@bungi.com
** Subject: (ASCEND) Dialing to Max 6000 using a IOS Router
**
**
**
**
** Hallo,
**
** I would like to dial to Max 6000 using a 2610 with a BRI module for backup
** porpouse.
** I have some problems with the configuration examples found on Cisco support
** site because always they think to link two Cisco IOS routers.
** Anybody have solved this problem and can give me the configuration for Max
** or/and for the cisco router ?
**
** Thank You
**
**
**
** Berardo Bonaduce
**
** Soluzioni Informatiche in rete
**
** Via Diano San Pietro 71
** 18010 Diano Castello
** Imperia - Italia
**
** Tel: 	+39 0183 407558
** Fax:	+39 0183 499207
** E-mail: 	berardo.bonaduce@uno.it
**
**
**
** ++ Ascend Users Mailing List ++
** To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
** To get FAQ'd:	<http://www.nealis.net/ascend/faq>
**
**

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>