TCLUG Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [TCLUG:5708] Need help in setting up NIC
Tried it with WD80*3 support but then the card is not recognized at boot up.
Thanks
Nishi
TChris Kesler wrote:
> Try setting it up as a Western Digital 80x3.
>
> On Fri, 30 Apr 1999, Kapoor, Nishikant X wrote:
>
> > Hi all
> >
> > I am having some problems in installing a 'SMC Elite 16T' NIC card in my PC
> > running RH5.1, kernel 2.2.2 and would appreciate if someone can help me get
> > it going.
> >
> > The NIC card is recognized during boot up:
> > Apr 30 05:10:16 genx kernel: smc-ultra.c:v2.00 6/6/96 Donald Becker
> > (becker@cesdis.gsfc.nasa.gov)
> > Apr 30 05:10:16 genx kernel: eth0: SMC Ultra at 0x340, 00 00 C0 A2 EA 97,
> > IRQ 10 memory 0xc8000-0xcbfff.
> >
> > But, dmesg shows lots of these error messages:
> > eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x43, t=20500.
> >
> > Linux-networking newsgroup makes it sound like an IRQ conflict but looking
> > through the IRQs, there doesn't seem to be any conflicts.
> > nkapoor:/home/nkapoor> cat /proc/interrupts
> > CPU0
> > 0: 753300 XT-PIC timer
> > 1: 7973 XT-PIC keyboard
> > 2: 0 XT-PIC cascade
> > 3: 264497 XT-PIC serial
> > 5: 4 XT-PIC soundblaster
> > 10: 0 XT-PIC SMC Ultra
> > 12: 365279 XT-PIC PS/2 Mouse
> > 13: 1 XT-PIC fpu
> > 14: 13874 XT-PIC ide0
> > 15: 48 XT-PIC ide1
> > NMI: 0
> > ERR: 0
> >
> > nkapoor:/home/nkapoor> ifconfig eth0
> > eth0 Link encap:Ethernet HWaddr 00:00:C0:A2:EA:97
> > inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0
> > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> > RX packets:0 errors:0 dropped:0 overruns:0
> > TX packets:0 errors:13053 dropped:0 overruns:39
> > Interrupt:10 Base address:0x350 Memory:c8000-cc000
> >
> > *** Base address in 'dmesg' being different from base address in 'ifconfig'
> > is normal; says Ethernet HOWTO ***
> >
> > Does anyone know what could be the problem here ?
> >
> > Thanks
> > Nishi
> > --People who live in windowed environments shouldn't cast pointers--
> > mailto:nishikant.x.kapoor@nspco.com http://www.c3ipros.com/nkapoor
> > -----------------------------------~~~------------------------------
> >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: tclug-list-unsubscribe@listserv.real-time.com
> > For additional commands, e-mail: tclug-list-help@listserv.real-time.com
> > Try our website: http://tclug.real-time.com
> >
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: tclug-list-unsubscribe@listserv.real-time.com
> For additional commands, e-mail: tclug-list-help@listserv.real-time.com
> Try our website: http://tclug.real-time.com
--
--People who live in windowed environments shouldn't cast pointers--
mailto:nishikant.x.kapoor@nspco.com http://www.c3ipros.com/nkapoor
-----------------------------------~~~------------------------------